With complex processors like the i. But the error interrupts are useless unless something is monitoring them. That seemed to come in around Kernel Release 3. Contact GuruCE for more information on the i. If you think Opal might fit your application we would love to hear from you , and get you on the list for a beta unit. You can download the source and a pre-built binary here. The demo source code is available here.
|Date Added:||28 October 2012|
|File Size:||28.98 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
But the error interrupts are useless unless something is monitoring them. Contact GuruCE for more information on the i. With complex processors like the i. We have a new sample app for the Opal Development Kit.
You can download the source and a pre-built binary here. Unless you’ve registered a socket listener to receive these “error frames” they’re totally wasted cycles.
53 Archives – Devicesolutions
It would make sense if in the “Exception 1” case above Passive and Ack Error the logic that decides to not increment the counter also decided to not set the ACK error bit. Opal is a 60mmx60mm plug-in module. If there is anything specific you want us to highlight in future videos, let us know! MX53, it can be difficult to strike a balance between exposing all the features, system cost, physical size and mechanical strength. Opal is perfect for devices that have demanding graphics flxcan.
MX53 port and us Device Solutions for information on Opal. We are very pleased to announce the Opal i. The source code for the Windows Embedded Compact 7 demo application is available here. Opal is based on the Freescale i.
The “CAN Standards” or the “CAN general knowledge that seems to determine what the chips are meant to do” is fairly specific in that case flfxcan a bus without any other devices. Check line of the following: When the next device powers up its controller ACKs the repeating flexcah, it has been sent, and the sender drops out of error-passive and gets back to normal.
The demo source code is available here. It uses two pin HiRose connectors to interface to a product-specific board.
[v2] can: flexcan: add 2nd clock to support imx53 and newer – Patchwork
MX53 module and development kit. This is a Windows Embedded Compact 7 application and uses the Silverlight tools for the user interface. This happens in every modern car with the first device to power up when you turn the key. We think the Opal form-factor achieves this for the types of industrial, automotive and medical devices our customers create.
There is hardware acceleration for video as well as 2D and 3D graphics up to p. If you think Opal might fit your application we would love to hear from youand get you on the list for a beta unit.
imx53 FlexCAN interface
As you documented, it counts up to and then keeps going. There are some more videos in flfxcan works which will be online in January.
We have created a couple of videos demonstrating specific features on the Opal Development Kit. In the code Flexfan using based on the mainstream 3. Another feature we hope will be useful on the development kit is the USB to serial converter for the debug serial port — you no longer have to go looking for your adapter!
iMX FlexCAN Driver
The chip is meant to keep quiet about this as it is totally expected. That seemed to come in around Kernel Release 3.
The original Bosch Spec says under “Fault Confinement”: We will have hardware available in July for beta customers with flexcab availability shortly after that.
It has CAN transceivers on-board, and push-wire connectors so you can get developing fast. This video has more details, along with a Windows Embedded Compact 7 demo.